Our furnace repair planning estimates
Our approximate furnace repair estimates run from $100–$250 for a flame-sensor repair to $1,000–$3,000 for heat-exchanger work. The symptom alone does not establish the repair: a furnace that stops after lighting can have a control, combustion or airflow problem.
| Furnace repair | Approximate estimate |
|---|---|
| Flame sensor | $100–$250 |
| Ignitor | $100–$300 |
| Control board | $300–$700 |
| Blower motor | $300–$1,000 |
| Heat exchanger | $1,000–$3,000 |
What these repairs involve
An ignition repair restores the part of the sequence that lights and proves the flame. A blower repair restores air delivery. A control-board replacement needs the correct connections and equipment setup. Operating checks after the work help establish that the original heating cycle completes.
Heat-exchanger work is a larger repair with a different access and labor requirement. The condition of the rest of the furnace becomes particularly important at that level. A replacement may offer a more useful comparison when several connected components are deteriorated.
What can change a repair estimate?
Equipment-specific parts, labor to reach a component, time spent finding an intermittent fault and damage elsewhere can change the total. Any diagnostic charge and the effect of applicable part coverage also influence what is payable. A retail part price alone leaves out the testing and labor needed to complete the repair.
A repeated shutdown may result from an air restriction rather than a failed safety switch. Replacing the switch without addressing airflow can leave the interruption in place. Repairing the cause is more useful than repeatedly resetting the equipment.
Repair or replace the furnace?
An isolated ignitor or sensor problem in otherwise sound equipment can be a practical repair. A major defect combined with recurring failures can justify comparing furnace replacement. The comparison should include the complete installation, including venting and duct connections.
Call now for furnace repair or new heating installation. If there is a fuel odor, smoke or a carbon-monoxide alarm, leave the building and contact emergency services from a safe place.




